Equipment Consignment Auction25DA

cab, ROPS, left hand reverser, A/C, air ride seat, buddy seat, 540 / 540E / 1000 PTO, 3 point hitch, rear wheel weights, 540,540E and small 1000 pto Front weight rack Rear wheel weights Air ride cab suspension Fendt Dynamic air ride seat Four rear remotes 650/65/38 rear tires 540/65/28 front tires Rear three point hitch Multi position drawbar Left hand reverser Exhaust brake

Loader, kubota diesel engine, power shift transmission, cab, ROPS, shuttle shift, A/C, radio, air ride seat, buddy seat, 540/1000 PTO, 3 point hitch, Two rear hydraulic remotes. 540/1000 PTO Rear tires 460/85/34 Front tires 340/85/24 M47 Alo loader with ride control Three point hitch Air ride seat Front and rear diff lock

540 PTO, 8 Ft flat front dual discharge extender w/10 inch hydraulic extension, DG500 scale, 435/50/R19.5 tires, Factory warranty available through a certified dealer.

1000 PTO, right conveyor discharge, hydraulic discharge gate, DG500 Dinamica Generale scales, 385/65R22.5 tires

ALO L755 loader, Q/A, Case FPT 4.5 L 6 cylinder 140 HP, diesel engine, 115 PTO HP, 8 speed power shift transmission, cab, A/C, 540/1000 PTO, 3 point hitch, 4 rear hydraulic outlets, rear wheel weights, 14.9-28 front tires, 18.4-38 rear tires, Includes 83 inch bucket not in pictures

New Holland 8.3 L 6 cylinder 278 HP, diesel engine, 200 PTO HP, 18 speed power shift transmission, cab, front differential lock, A/C, buddy seat, 1000 PTO, 3 point hitch, 4 rear hydraulic outlets, rear wheel weights, 480/70R34 front tires, 520/85R46 rear tires

84 Inch pad foot drum, 28,000 lb operating weight, 8 ft 5 inch leveling blade, Cummins QSB 4.5 litre 4 cylinder 160 HP engine, enclosed ROPS cab, heater, roof mounted A/C, 23.1- 26 tires

1000 PTO, Complete Butterfly Set Includes: 5090MT-R, 5090 MT-L, 5090 MT-C and 3636FT (2016 year) Mower

John Deere 6466TR-03 diesel engine, cab, ROPS, radio, 540/1000 PTO, 11.00-16 front tires, 460/85R38 rear tires

Loader, Q/A, 3.6 L 4 cylinder 75 HP, diesel engine, 540 PTO HP, ROPS, 7.5-16 front tires, 16.9-28 rear tires

1000 PTO, 17 ft box, steel floor, Loewen manure spreader. Converted to PTO driven hydraulic McKee beater’s. The box is 5’ high 5’8”wide 17’ long

International B210F 7.6 L diesel engine, Allison automatic transmission, A/C, cruise control, air ride driver seat, radio, full lockers, 238 inch WB

Loader, Q/A, 57 inch bucket, grill guard, Yanmar 1.1 L 3 cylinder diesel engine, open station platform, ROPS, 540 PTO, 3 point hitch, 23X8.50 front tires, 31X12-16.5 rear tires, Hydrostatic Transmission

14,000 lb GVW, street side door, single swing gate, rear swing door, kingpin hitch w/ 2-5/16 inch adjustable coupler, single leg landing gear w/ removable crank handle, tires: 235/86/16

Dual Direction, Ultra Glide Cab Suspension, deluxe air ride seat, A/C, heater, tilt steering, fold away trainer seat, Harvest Manager Pro cutting system, Cummins 4.5 Litre engine, Goodyear 600/65/R28 Tires *Note*: Attached header frame included as is. All cutting parts removed. *

14,000 lb GVW, street side door, single swing gate, rear swing gate with sliding calf gate, kingpin hitch w/ 2-5/16 inch adjustable coupler, single leg landing gear w/ removable crank handle, tires: 235/86/16

Enclosed cab, pilot controls, RATO gas engine, 16 inch dig bucket, hydraulic thumb, 1 auxiliary hydraulics, swing boom, backfill blade

Enclosed cab, pilot controls, 25HP Kubota Diesel, , 16 inch dig bucket, hydraulic thumb, 1 auxiliary hydraulics, swing boom, backfill blade, rubber tracks

Enclosed cab, pilot controls, RATO gas engine, 16 inch dig bucket, hydraulic thumb, 1 auxiliary hydraulics, swing boom, backfill blade, rubber tracks

Case 8.3 L 93 HP, diesel engine, 108 PTO HP, 8 speed partial power shift transmission, cab, ROPS, 8 front weights, 540/1000 PTO, 3 point hitch, 3 rear hydraulic outlets, rear wheel weights, 11.0-16 front tires, 20.8-38 rear tires

4 side doors, 1 end door, 9 ft 6 " high

Open station, pilot controls, RATO gas engine, 16 inch dig bucket, hydraulic thumb, 1 auxiliary hydraulics, swing boom, backfill blade, Off Road Undercarriage, rubber tracks

Four multi doors, end door

7.4L V8 OHV 16V gas engine, 295 liter fuel tank, drivers side door, automatic retracting steps, 18 Ft awning, dual A/C, Emerald plus Generator, outdoor shower, Mirror ext with defrost, tires are all 8R19.5

3.5 L, V6 Turbo, gas, 6 speed automatic transmission, P/W, P/L, A/C, collision mitigation system, running boards, 5.5 ft box, 136 liter fuel tank, soft roll up tonneau cover, 275/65R18 tires

1000 PTO, left conveyor discharge, hydraulic discharge gate, 715 Weigh-Tronix scales

2.4 L, 4 cylinder, gas, 5 speed automatic transmission, P/W, P/L, A/C, heated seats

10 ft peak height, side entry door, 384 Sq-Ft floor space

Ford engine, radio, stereo, Firetruck Body

Nelson self levelling sprinklers, (37) 40 ft sections<br/>1480 ft irrigation system field ready

96 inch interior width, 80 inch interior height, barn doors, electric brakes, spring suspension, 14,000 lb GVW, 7000 lb axles, 235/80/16 tires

2007 ford/crestline ambulance 2 Wheel drive, 6.0 litre diesel engine

540 PTO, double spinners, 16.5L-16.1SL tires

Enclosed cab, 4 speed powershift transmission, 86HP Perkins Diesel, 88 inch grapple loader bucket, dig backhoe bucket, stick, outriggers, *(Unit runs, but transmission is stuck in 4th gear)* Glass missing on lower driver side door. , 12.5/80-18 front tires, 19.5L-24 rear tires

400 Sq-Ft, 8 ft eave height, 27 GA corrugated panels

Open station, pilot controls, 15HP Yanmar Diesel, 16 inch dig bucket, manual thumb, 1 auxiliary hydraulics, swing boom, backfill blade, rubber tracks

Open station, pilot controls, 15HP Yanmar Diesel, , 16 inch dig bucket, manual thumb, 1 auxiliary hydraulics, swing boom, backfill blade, rubber tracks

14 HP Kohler engine, 28 inch board width, 12 ft log length, 14.5 ft track bed

3.4 L 4 cylinder 60 HP, engine, 8 speed partial synchro transmission, open station platform, 540 PTO, 3 point hitch, 17.5-16 front tires, 16.9-30 rear tires

5.5 ft pick-up

Open station with canopy, RATO gas engine, 39 inch smooth bucket,

Perkins 2.5 L 3 cylinder 47 HP, diesel engine, 37 PTO HP, 8 speed manual transmission, open station platform, 540 PTO, 3 point hitch

2.3 L 4 cylinder 38 HP, diesel engine, 34.1 PTO HP, 3 point hitch

Open station with canopy, 1.9 Litre gas engine, 4 speed manual transmission, brush sweeps, 6 Ft manual angle dozer, Gearmatic winch, 10 inch track pads, single grousers

Loader, 50 inch bucket, Continental 2.2 L 45 HP, Gas engine, 34 PTO HP, 6 speed manual transmission, open station platform, 540 PTO, 3 point hitch, track weights, 7.5L-15 front tires, 14.9-24 rear tires, *(Rear rough cut mower in images not included)*

75 inch wide deck, 16 ft tilt deck, steel deck, hydraulic brakes, spring suspension, ball hitch, rub rails, stake pockets, 10000 lb axles, 7.50/R16 tires

77 inch rise, removable Ramp, certified power unit

Collar beams added on end trusses, dirt skirt, roll-up doors, commercial 3-layer galvanized steel frame structure, commercial triple layer ripstop polyethylene tarpaulin cover.

(1) window, (1) side man door, (1) end door *(Note images of slight damage inside)

14 inch cutting diameter

1.6L 2-cylinder gasoline row-crop tractor with a 2 point hitch

Enclosed cab, 420CC gas engine, 16 inch dig bucket, manual thumb, 1 auxiliary hydraulics, 32 inch stick, backfill blade, rubber tracks

Universal Mount, 36 inch arm opening, 6 inch tine spacing, 2500 lb weight capacity

Heavy-duty steel frames, 700 lb shelf capacity

Open station, gas engine, 15 inch dig bucket, manual thumb, 32 inch stick, backfill blade, 7 inch rubber tracks

Open station, gas engine, 16 inch dig bucket, manual thumb, 32 inch stick, backfill blade, rubber tracks

4.1 Litre 4 cylinder engine

13.5 Horse power, 3 speed manual, 39 inch bucket, 23X8.5-12NHS

6000 lb lift capacity, 48 inch lift height, single-point lock release

4 mm twin wall polycarbonate panels, UV protected panels

Universal mount, 36 inch arm opening, 6 inch tine spacing, 2500 lb weight capacity

Heavy duty pressing, fully welded H-frame, air & manual dual operation

85 inch H, 35 inch W, 59 inch L, Bluetooth, computer controlled temperature, blue lighting, massage jets, left drain

Universal mount, 54 inch jaw opening, 3000 lb weight capacity

12 inch -24 inch rim clamping capacity, step pedal control, 2 HP motor, certified for Canada/USA

Black frame with grey doors

25 Ft Long

gas engine, 40 inch smooth bucket, electric start* (See Damage Images), 7 inch rubber tracks

IH 2.9 L diesel engine, open station platform, 540 PTO, 3 point hitch, front wheel weights, 6.00-16 front tires, 13.6-28 rear tires, *(Rotary Tiller Not Included)

4 Augers

5.9L L6 OHV 24V TURBO , diesel, 5 speed manual transmission, P/W, P/L, A/C, 8 ft box, Wooden side boards, 235/80R16 tires

Open station, 420CC gas engine, 38 inch smooth bucket, 1 auxiliary hydraulics, 6 inch rubber tracks

72 inch feed port, 13 Cu. ft capacity, 2 inch finished crush

Open station, 420 CC gas engine, 40 inch smooth bucket, 1 auxiliary hydraulics, rubber tracks

Open station, 420 CC gas engine, 40 inch smooth bucket, 1 auxiliary hydraulics, rubber tracks

48 inch trenching depth, 8 inch trenching depth, 34 teeth

48 inch trenching depth, 8 inch trenching depth, 34 teeth

3.5 GPM at 4000 PSI, 15 HP Lifan gasoline engine, electric start, 12 volt burner

3.5 GPM at 4000 PSI, 15 HP Lifan gasoline engine, electric start, 12 volt burner

3.5 GPM at 4000 PSI, 15 HP Lifan gasoline engine, electric start, 12 volt burner

3.5 GPM at 4000 PSI, 15 HP Lifan gasoline engine, electric start, 12 volt burner

9 HP OHV Loncin engine, horizontal tank, 18.7 CFM @ 90 PSI

72 inch sweeping width, 26 inch brushes, 25 degree left or right swing angle

72 inch sweeping width, 26 inch brushes, 25 degree left or right swing angle

8 inch cutting depth, 3 inch cutting width, 32 carbide teeth, 50 degree swing angle

8 inch cutting depth, 3 inch cutting width, 32 carbide teeth, 50 degree swing angle

30 degree left & right, bolt-on cutting edge, universal quick mount

Rubber wood tabletop, recessed aluminum handles

Rubber Wood Tabletop, Recessed Aluminum Handles, 9 piece

Universal mount, 36 inch arm opening, 6 inch tine spacing, 2500 lb weight capacity

Symmetric arms, 77 inch lift height, dual-point lock release

3.3 L, V6, gas, automatic transmission, P/W, P/L, A/C, 3rd row seating, upgraded stereo, 215/65R16 tires

Dozer Blade/Snow Plow Pusher, 30° Left & Right, Bolt-On Cutting Edge, Adjustable Skid Shoes, Universal Quick Mount

9 carbide teeth, 24'' cutting capacity, 14 HP gasoline engine

6 L, gas, automatic transmission, *(This vehicle is NOT a Duramax diesel. Driver side was replaced from different unit)*, 265/75/16 tires

72 inch cutting blade, 175 inch max cutting height, 200 inch max cutting width, 25 teeth

72 inch cutting blade, 175 inch max cutting height, 200 inch max cutting width, 25 teeth

5.7 L, gas, automatic transmission, leather, P/W, P/L, A/C, 235/85/16 tires

5.3 L, gas, automatic transmission, leather, P/W, P/L, A/C, 265/75/16 tires

48 inch fork length, 4000 lb lift capacity, 8-44 inch adjustable fork width

48 inch fork length, 4000 lb lift capacity, 8-44 inch adjustable fork width

7.5 inch spacing, grass attachment

5.7 L, V8, gas, automatic transmission, P/W, P/L, A/C, upgraded stereo, 6 ft box, Aarow Canopy, Severe frame corrosion., 245/75R16 tires

72 inch sweeping width, 30 inch brush diameter 25 degree left or right swing angle

72 inch sweeping width, 30 inch brush diameter 25 degree left or right swing angle

72 inch working width, 66 inch cutting width, single edge dual blade

72 inch working width, 66 inch cutting width, single edge dual blade

heavy duty 11 oz PE cover & drive through doors

Approximately 24,000 Linear Ft

4 inch chipping capacity, category 1 hookup, 30-50 HP tractor, PTO shaft

Approximately 24,000 lineal Ft

Approximately 24,000 lineal Ft

Floor replaced 2 years ago, Axles rebuilt last year

Gas/ LPG, 8000 running watts, (4) 120V 20A receptacles, (1) 120V 30A receptacle, (1) 120/240V 50A receptacle, electric start

Gas/ LPG,8000 running watts, (4) 120V 20A receptacles, (1) 120V 30A receptacle, (1) 120/240V 50A receptacle, electric start

40'' work platform, air operating power

40'' work platform, air operating power

540 PTO, Drum, 60 inch pickup

Galvanized Steel, 600 Sq-Ft, Lockable Gate, PVC Coated Mesh

Up to 1056 Eggs, Auto Control, 98% Hatching Rate, 12 Egg Trays

Cold Frame, Roll-Up Mesh Windows, Round Top Roof

12 mil ripstop leno mesh cover, cold frame, roll-up windows, peak ceiling roof

4 mm twin wall polycarbonate panels, UV protected panels

6 HP Kohler Command Pro Engine, 12 inch compaction depth

11 oz PE cover, 6 ft 6 inch overhead, 10 ft peak ceiling

Bolt-On Cut Edge, 1500-lb Weight Capacity, Universal Quick Mount

Fire retardant, water resistant, UV protected

12.5 gauge, 4 point x 6 inch spacing, 1320 ft per roll

620/70R42 Tractor Duals C/W Clamps will fit tractor with 20.8R42 tires

(29) 40 ft pieces 3 inch hand line irrigation pipe c/w Sprinklers

Deck is 10 Ft, box is 8.5 Ft long and 76 inch wide, 2 inch receiver.

86 inches wide, 72 inch working width, 8 inch tilling depth, 36 tines

Construction Specs: 6 x WS36 + IWRC, total length unknown (roll was 3000 ft when new)

86 inches wide, 72 inch working width, 8 inch tilling depth, 36 tines

Construction Specs: 6 x WS36 + IWRC, total length unknown (roll was 3000 ft when new)

Construction Specs: 6 x WS36 + IWRC, total length unknown (roll was 1000 ft when new)

72 Inch working width, 18 Inch opening height, 13 cubic feet capacity

72 Inch working width, 18 Inch opening height, 13 cubic feet capacity

84 Inch blade Length, 30 degrees of left to right angle, 10 degrees up down tilt

84 Inch blade Length, 30 degrees of left to right angle, 10 degrees up down tilt

size is 520/85 R42

Quick attach, rake, ripper, grabber, auger w/ 8 inch auger bit,12 inch auger, 8 inch bucket, 20 inch bucket, 32 inch bucket

Quick attach, rake, ripper, grabber, auger w/ 8 inch auger bit,12 inch auger, 8 inch bucket, 20 inch bucket, 32 inch bucket

Quick attach, rake, ripper, grabber, auger w/ 8 inch auger bit,12 inch auger, 8 inch bucket, 20 inch bucket, 32 inch bucket

Quick attach, rake, ripper, grabber, auger w/ 8 inch auger bit,12 inch auger, 8 inch bucket, 20 inch bucket, 32 inch bucket

Quick attach, rake, ripper, grabber, auger w/ 8 inch auger bit,12 inch auger, 8 inch bucket, 20 inch bucket, 32 inch bucket

Quick attach, rake, ripper, grabber, auger w/ 8 inch auger bit,12 inch auger, 8 inch bucket, 20 inch bucket, 32 inch bucket

72 Inch bucket width, 1.6 inch screening mesh, 18 cubic feet capacity

84 inch cutting width, 1.5-5.5 inch cutting height, 3 blades.

6 Ft x 11 Ft, 4 Inch x 4 Inch spacing

8.8 cubic ft capacity, 6.6 inch discharge chute, 3.5 inch x 3.5 inch sleeve grid

8.8 cubic ft capacity, 6.6 inch discharge chute, 3.5 inch x 3.5 inch sleeve grid

8 inch,12 inch and 16 inch augers

8 inch,12 inch and 16 inch augers

Auto-lock, 95 inch min height, 142 inch max height, locking swivel caster wheels

Stainless steel drum, caster wheels, feather discharge chute

6 Mil Clear EVA Plastic Film, Cold Frame, Hand Crank Roll-Up Sides, Peak Ceiling Roof

5 Ft x 9 Ft; 4 Inch x 4 Inch spacing

3400 lb compact capacity, 6.5 HP Loncin engine

solid steel, universal mount, 4 inch tine spacing, 45-70 HP

Left and Right Angle, 2 inch Mount Receiver, Wireless Winch Control

Left and Right Angle, 2 inch Mount Receiver, Wireless Winch Control

Stainless Steel Frame & Rubberwood Tabletop

Stainless Steel Frame & Rubberwood Tabletop

30 Inch

Galvanized, interlocking design, various commercial applications, quick set up

Open station with canopy, brush sweeps, manual angle dozer, winch, single grousers

Universal tractor mount 96 inch manual angle snow blade

Mercruiser 4 cylinder with a Bimini top and a live well.

Rear discharge, 540 PTO speed, 1 inch to 5.5 inch cutting height

1.5 inch to 5.5 inch cutting height,

540 PTO

540 PTO

Pneumatic & manual operation, 10 bed height positions

Galvanized steel, 200 Sq-Ft, lockable gate, PVC coated mesh

Outdoor dog runner, pet exercise house, lockable gate, 6 ft chain-link fence

Digital display, 22,000 lb capacity, 110V/60 Hz, full capacity tare, auto zero tracking, 78-1/2 inch x 39-1/2 inch

5.5 HP Gas Engine, Rear Tine, 8 inch Tilling Depth

Galvanized corrugated metal, apex roof design, two air vents

Galvanized corrugated metal, apex roof design, two air vents

29 GA corrugated metal, 67 inch edge height

29 GA corrugated metal, 67 inch edge height

12 Inch and 18 inch augers, 48 - 88 inch drilling depth

12 Inch and 18 inch augers, 48 - 88 inch drilling depth

12 Inch and 18 inch augers, 48 - 88 inch drilling depth

12 Inch and 18 inch augers, 48 - 88 inch drilling depth

Approximately 2000 Linear Ft

12.5 Gauge Galvanized

6 inch, 12 inch and 14 inch augers

6 inch, 12 inch and 14 inch augers

Quick attach, adjustable

Quick attach, adjustable

Quick attach, adjustable

Quick attach, adjustable

Quick attach, adjustable

Quick attach, adjustable

100% solid forged steel

Tractor Haulable

4.5 Ft Tall - 2 Inch x 2 Inch Galvanized Mesh Approximately 800 Linear Ft

10-24 inch rim, computerized, 220 RPM, ± 1 gram of accuracy, ALU balancing modes

10-24 inch rim, computerized, 220 RPM, ± 1 gram of accuracy, ALU balancing modes

Approximately 45-50 various lengths of 3 inch, 4 inch, 5 inch and 6 inch pipe, risers, sprinkler heads.

Approximately 18-20 lengths

4 ft Tall - 2 Inch x 2 Inch Galvanized Mesh Approximately 600 Linear Ft

4 Ft Tall - 2 Inch x 2 Inch Galvanized Mesh Approximately 800 Linear Ft

4 Ft Tall - 2 Inch x Inch Galvanized Mesh Approximately Linear 600 Ft

100 Inch x 100 Inch, aluminum checker plate, 55350 kg load rating

4 Ft - 2 Inch x 2 Inch Galvanized Mesh Approximately 600 Linear Ft

6 to 8-ton Carrier, 16-21 GPM

3-ply multi V, 300 Ft roll

81 inch between fenders

Wood deck, fold down rear gate

80 inch wide deck, 16 ft tilt deck, wood deck, slide in ramps, ball hitch, stake pockets, Comes with sides

gas engine

800 mm sand bucket, rake, ripper

3.9 Litre Donfeng Cummins engine

Approximately 30 various lengths of 3 inch, 4 inch and 5 inch pipe.

Approximately 16 lengths

540 PTO

(4)-24 Ft beams, (1)-18 Ft beam, (1)-13.5 Ft beam, (1)-20 Ft beam, (2)-19 Ft columns

Approximately 1500 Ft

Fits 1-2 ton excavators, 20 inch long, 9 inch wide, pin diameter 1 inch

Fits 1-2 ton excavators, 20 inch long, 9 inch wide, pin diameter 1 inch

Fits 1-2 ton excavators, 20 inch long, 9 inch wide, pin diameter 1 inch

Fits 1-3 ton excavator, pin diameter 1 inch

Fits 1-3 ton excavator, pin diameter 1 inch

6.5 HP gasoline engine

6.5 HP gasoline engine

manual transmission, Partial rebuilt gas engine on pallet included, 8.25R20 tires

71 inch between fenders

Fits John Deere tractor models X710, X730, X734, X738, X739, X750, X754 & X758

Fits 1-3 ton excavators, working pressure 12-21Mpa, Speed 700-4000r- min/max torque 21.4 nm

Universal Attachment, includes 48 inch general purpose bucket

12.5 Gauge Galvanized Approximately 1320 Ft per roll

Various Thickness 4 Ft x 8 Ft

Various Thickness 4 Ft x 8 Ft

48 Inch, 6600 lb load rating

Fits 1-2 ton Excavator, pin diameter 1 inch.

48 Inch, 6600 lb load rating

Fits 1-3 ton excavators, 3.5 inch stem, 8 inch bit

48 Inch, 6600 lb load rating

48 Inch, 6600 lb load rating

48 Inch, 6600 lb load rating

Auto-lock, 95” min. height, 142” max. height, locking swivel caster wheels

Single Phase 220 Volt with Feeder Stand

3 - 7 Ton Maximum Capacity, 12 volt

8 inch, 12 inch, 16 inch to fit 1-2 ton excavator, pin diameter 1 inch

8 inch, 12 inch, 16 inch to fit 1-2 ton excavator, pin diameter 1 inch

Fits 1-2 ton mini excavator, pin diameter 1 inch

Fits 1-2 ton mini excavator, pin diameter 1- inch.

Fits 1 - 3 ton Excavator, 1 Inch pin diameter

Fits 1 - 3 ton Excavator, 1 Inch pin diameter

Fits 1 - 3 ton Excavator, 1 Inch pin diameter

Fork attachment; Quick Release; 4 Cubic Yard Bin

48 Inch 5000 lb Capacity

6600 lb load rating

6600 lb load rating

6600 lb load rating

6600 lb load rating

6600 lb load rating

540 PTO

27.5 Ft Length

7.3 L, diesel, 8 ft box

7.3 L diesel engine, 5 speed manual transmission, 14500 lb GVW

29.75” ID  x 16 ft long

(12) various sized removable Insulated Reefer Wall Mats.

Fits JD X300 Series, X500 and X520

Hand crank depth adjuster. Serial # 0208

(2) 12 ft by 4inch, (4) 12 ft by 3inch.

Tamping Rammer with EPA engine.

2.3 L diesel engine

Fits 1-2 ton excavators, pin diameter 1 inch

4Ft high, 5 inch x 16 inch spacing

Fits 1-2 ton excavators, pin diameter 1 inch

Fits 1-2 ton excavators, pin diameter 1 inch

Fits 1-2 ton excavators, pin diameter 1 inch

1500-lb Capacity, Heel Restraint, 6 inch Wide, 2.5 inch Thick

1500-lb Capacity, Heel Restraint, 6 inch Wide, 2.5 inch Thick

7 FT High 10 FT Wide 20 Ft long

2 Ton Come Along Chain

9 Inch Width x 2 Inch Thickness x 4.5 Ft Long; 3.5 Inch Opening

Assorted lengths of 4 and 5 inch irrigation pipe approximately 30 pieces. Some damaged

1 - 1/2 Inch (100) lbs

3/4 HP, 9Amp. , 110 Volt, CSA toggle switch. Bits included. <br/>Serial # 000323

Universal coupler

to fit 1-2 ton excavator, pin diameter 1 inch.

to fit 1-2 ton excavator, pin diameter 1 inch.

to fit 1-2 ton excavator, pin diameter 1 inch.

Fits 1 - 2 ton Excavator, 1 Inch pin diameter

Fits 1 - 2 ton Excavator, 1 Inch pin diameter

12 Ft length, 2 wheel ramp; 1,000 max capacity

230 Volt, 5750 watt, 1 phase commercial deep fryer. (7) fryer baskets, lever drain valve. Serial # KDEF-00965

14 Gauge Approximately 4750 Ft

Hercules Diesel

33 degree, 3 Inch x. 120 Inch, quantity: 2000 per box

33 degree, 3 Inch x. 120 Inch, quantity: 2000 per box

33 degree, 3 Inch x. 120 Inch, quantity: 2000 per box

Craftsman 3.0 HP

(1) 4 ft x 100 ft, 2 inch x 2 inch; (1) 24 inch x 100 ft, 2 inch x 1 inch; (1) 18 inch x 50 ft, 1 inch x 1/2 inch

2 - 1/4 Inch x. 094 Inch 4500 per box, 15 degree belt fed

2 - 1/4 Inch x. 094 Inch 4500 per box, 15 degree belt Fed

36 Sheet pan slats.

1 - 3/8 Inch (100) lb

1 - 1/2 Inch (100) Lbs

1 - 1/2 Inch x 148

2 - 1/2 Inch x 3 Ga.

3 - 1/2 Inch (20d)

(1) Box 2 - 1/4 Inch (50) lb ; (1) Box 2 - 1/2 Inch (50) lb

4 Inch x 4 Inch (20d)

980 Millimetres Length

Towable, Hercules engine

4 Inch x 4 Inch (20d)

14 Gauge Approximately 4750 Ft

14 Gauge Approximately 4750 Ft

14 Gauge Approximately 4750 Ft

14 Gauge Approximately 4750 Ft